C2 Premier Services Call (512) 715-2706
Call (512) 715-2706

Monday to Friday, 8:00 AM to 7:00 PM

Plywood lined three sided run in shelter livestock pen central texas

Metal Buildings

Metal Building Construction in Burnet, TX

Metal building construction in Burnet, TX for shops, garages, barns and storage, handled by one local crew from the graded pad to the final trim. Call C2 Premier Services for a free estimate.

Call (512) 715-2706Request a Free Estimate

Metal Buildings Planned Around the Way You Use Them

A metal building earns its keep when it fits the work it holds. A workshop needs room to swing a long board and light at the bench. An equipment barn needs a door wide enough for the tractor and a clear span with no posts in the way. A garage on a home lot needs to sit close to the house and shed water away from it.

C2 Premier Services builds residential metal buildings, garages, workshops, storage structures and agricultural steel buildings for property owners in Burnet County and the towns around it. Metal building construction in Burnet, TX starts with how you plan to use the space. From there we work back to the size, the door and window openings, and the spot on your land where the building should sit, so the finished building suits both the property and the job.

Limestone ranch house metal roof patio cover steel posts
Low angle two bay metal loafing shed clear blue sky oak pasture texas

Signs a Metal Shop Building Is the Next Step

Most owners call us after the same few frustrations pile up. A metal shop building solves problems that a small shed or an open carport cannot.

  • Tools, mowers and trailers are scattered between the garage, the porch and the yard
  • Equipment and hay sit under tarps that tear in the first strong wind
  • A home business or hobby has outgrown the garage
  • Trucks and boats bake in the summer sun with no covered parking
  • An old wood barn has started to lean, rot or leak

If two or three of those sound familiar, a steel building is worth pricing. Steel framing and metal panels need little upkeep, and a clear span leaves the floor open for whatever you need to park, store or build.

Request a Free Estimate

How We Build

Metal Building Construction in Burnet, TX: Our Process

Every build follows the same order, because each step depends on the one before it. A building is only as square as the pad under it, so the ground work gets as much attention as the steel, and our site preparation in Burnet is part of the same job.

Our team shows up prepared, works efficiently and follows through on the details, so you are not left chasing separate crews for the dirt, the foundation and the frame.

  1. Site Visit and Free Estimate

    We walk the property with you, look at access for delivery trucks, check the slope and drainage, and talk through size, doors and use. You leave the visit knowing what we will build and what the price covers.

  2. Clearing, Grading and Layout

    Brush and trees come off the footprint, the ground is graded so water runs away from the building, and the corners are staked and checked for square. Our site preparation crew handles this step, so the pad is ready on schedule.

  3. Foundation Coordination

    We coordinate the foundation so it is level, sized to the building and set with the anchors where the frame needs them. Getting this right keeps doors closing true and panels lined up for years.

  4. Frame, Panels and Final Walkthrough

    The frame goes up, gets aligned and anchored, then the wall and roof panels, doors and trim follow. We finish with a walkthrough together, so every detail is checked before we call the job done.

Turn-Key Builds or Metal Building Installation for Your Kit

The first way to work with us is a full turn-key project: we handle the site work, coordinate the foundation and assemble the building, so one company owns the schedule. Fewer handoffs mean fewer delays.

The second is metal building installation for owners who have already bought a kit. Many people look for metal building erectors only after the steel is on order and the supplier sends no crew. We assemble pre-engineered building systems to their drawings, with the frame aligned, anchored and paneled the way it was designed.

Either way, we look at the ground first. A kit set on an uneven or poorly drained pad will fight you for its whole life, so we check the site before the steel arrives.

Open front metal loafing shed red trim ladder hill country build
Open front metal loafing shed livestock shelter pasture

Metal Barn Construction for Ranch and Farm Property

Rural land asks a lot of an outbuilding. Metal barn construction gives you covered storage for hay, feed, tractors and implements, with a frame that does not rot, warp or draw termites the way an old wood barn can.

We plan agricultural steel buildings around how you move through the property: a barn where trucks and trailers can turn around, wide doors facing your pens or pasture gate, and a pad graded so runoff stays outside. Burnet County averages about thirty inches of rain a year, and much of it can arrive in heavy bursts, so drainage around a barn matters as much as the roof.

If the barn site still holds cedar and brush, our land clearing work opens the ground and hauls the debris away before construction begins.

Open front metal loafing shed livestock shelter pasture
Welding pipe gate post ranch entry gate dusk

Garages, Workshops and Storage Buildings

A detached garage, workshop or storage building on a home or business lot follows different rules than a barn. It has to look right beside the house, fit the setbacks and leave room for the driveway. We help you choose a size and door layout that works every day, whether that means two cars and a workbench, a boat and a camper, or locked storage for business inventory.

Outside city limits, Burnet County requires a building permit through its Development Services office. The county asks for a 911 address before it issues permits for a new residence or business project, and a site inside a designated flood hazard area needs an elevation certificate from a surveyor or a letter from an engineer. We raise these questions at the estimate, so the pad and the paperwork line up.

C2 premier services yard sign snowy lot wire fence gates

What Affects the Cost of a Metal Building

Every metal building is priced to its site and plan, so an honest number comes after a site visit. These are the factors that move the price most:

  • The footprint, wall height and roof pitch of the building
  • The number and size of overhead doors, walk doors and windows
  • How much clearing and grading the site needs before the foundation
  • The foundation and how far concrete trucks must travel to reach it
  • A turn-key build or installation of a kit you already own
  • Access for delivery trucks and lifting equipment on the property

A flat, open lot near a paved road costs less to build on than a sloped, wooded site at the end of a ranch road. Your free estimate for metal building construction in Burnet, TX spells out each factor, so you can adjust size or features before anything is ordered.

Call (512) 715-2706 for Your Estimate
Steel frame metal building erection concrete slab ladders central texas

Why Owners Choose a Local Steel Building Contractor

C2 Premier Services is locally owned and operated in Burnet. We work the same Hill Country ground our customers own, and we know what shallow, rocky soil does to a building pad.

The biggest difference is that we handle the whole project. A steel building contractor who also clears and grades the site removes the gap where most delays start: the dirt crew finishes late, the concrete waits, and the steel sits in the yard. With one team responsible, the steps line up and you have one number to call.

We believe in doing the job right the first time, so every building stays square, sealed and useful long after the walkthrough. Photos of finished jobs are in our metal building project gallery, and the rest of our fencing and land services in Burnet can be planned alongside your build.

Where We Build

Metal Buildings Across the Hill Country and Central Texas

Burnet sits where U.S. Highway 281 meets State Highway 29, which puts our crew within reach of ranch land, lake homes and growing communities in every direction.

North of Burnet, larger acreage around Lampasas suits a steel barn for hay and equipment. South along the highway, lake properties in Marble Falls, Granite Shoals and Horseshoe Bay often call for a garage or boat storage on a tight, sloping site. To the east, new homesites around Liberty Hill and Bertram need workshops and storage on freshly cleared land.

Closer to home, we handle metal building construction in Burnet, TX on county roads and town lots throughout Burnet and Burnet County.

Metal Building Questions

Metal Building Questions From Property Owners

Rather talk it through?

(512) 715-2706

Monday to Friday, 8:00 AM to 7:00 PM

Can you install a metal building kit I already bought?

Yes. C2 Premier Services assembles pre-engineered metal building kits for owners who bought the steel from a manufacturer. We follow the kit drawings, align and anchor the frame, and hang the panels, doors and trim. Before delivery, we check that the pad is level and drains properly, because a kit set on poor ground causes problems with doors and panels later.

Do I need a permit for a metal building in Burnet County?

In most cases, yes. Burnet County requires building permits outside city limits, issued through its Development Services office, and a new residence or business project needs a 911 address before any permit. A site inside a designated flood hazard area also needs an elevation certificate or an engineer's letter. Inside a city, that city's own permit office applies.

Does the site have to be cleared and graded first?

Yes. A metal building needs a level, well-drained pad, or the frame will not sit square and water will collect along the walls. We clear brush and trees from the footprint, grade the ground so runoff moves away from the building, and stake the corners before foundation work starts, all as part of a turn-key build.

How do I choose the right size metal building?

Start with what the building must hold today, then add room for what you expect to own later. Measure your largest truck, trailer or tractor, including the door clearance it needs. Allow space to walk around equipment and open doors. During the free estimate, we talk through use and layout so the building fits the work.

What can a metal building be used for?

We build garages, workshops, storage buildings and agricultural structures such as hay barns and equipment barns. Owners use them to park vehicles and boats, run a home shop, store business inventory or keep feed and implements out of the weather. A clear span leaves the floor open, so the space can change as your needs change.

Start Your Build

Plan Your Metal Building With a Local Crew

A metal building is a long-term investment in your property, and the work done before the first panel goes up decides how well it serves you. When one crew clears the site, grades the pad, coordinates the foundation and raises the steel, nothing falls between contractors and the schedule stays on track. Call C2 Premier Services, Monday to Friday, 8:00 AM to 7:00 PM, or send a request for your free estimate.

Request Your Free EstimateCall (512) 715-2706
Call
(512) 715-2706
Hours
Monday to Friday
8:00 AM to 7:00 PM
Based in
1500 County Road A
Burnet, TX 78611
Cleared lot track loader brush pile site preparation